Menu

/RASKIA 100 ACC TO

  • BPI RASKIA TRANSFORMER PULITORE FINITORE E FRONTALE

Torsional action tensioning
Spaced scraping elements: cleaning is achieved on two levels
Differentiated action at every point of contact with the mat
Suitable for heavy operation in harsh conditions
Replaceable wear resistant inserts

Finishing cleaners with steel-elastomer cleaner body and easily replaceable wear-resistant steel inserts.
For placement to a section after the point of detachment of the belt from the drive roll, on the return section of the tape.

The design of these scraping elements is the result of thirty years of applied experience acquired by Barra Project International Srl: the multiple sector scraper formation ensures for the cleaning of the whole carpet surface to compensate for possible irregularities in contact surface.
Suitable and recommended for use in severe operating conditions.

Technical specifications

  •  /RASKIA scraping elements with steel-elastomer body and wear-resistant steel inserts
  •  blade length: 100 mm

Types of tension (with torsional action)

M
mechanical
  • manual tensioning
  • single for belts up to B650, double for belts of greater width
P
pneumatic
  • single for belts up to B650, double for belts of greater width
  • suitable for uses where it is difficult to access the cleaner for re-tensioning
  • easily connectible to the compressed air network
PA
self-powered pneumatic
  • single for belts up to B650, double for belts of greater width
  • suitable for uses where it is difficult to access the cleaner for re-tensioning
  • having a tank axle for compressed air (Pmax = 8bar)
  • easily connected to the compressed air network or can easily be filled using a battery powered portable compressor or through a hand pump if necessary
/RASKIA FINISHER (TO) WITH WEAR-RESISTANT STEEL INSERTS
Background Color:
 
Background Pattern:
Reset