Structural strength, ideal for very sticky materials
Steel blade with hard metal insert
Core shock absorber in elastomer to ensure continuous adhesion
Can be equipped with anti-scale plate
Frontal cleaner with scraping elements entirely in steel and hard metal insert. It is ideal for heavy-duty exercises and for the removal of particularly sticky materials. The elastomer core that fixes the scraping blade to the shaft allows the blades to flex: this allows the blade to maintain a continuous grip on the belt, compensating for any irregularities in the worktop.
For attachment to the drive roller of the conveyor belt.
The level of carpet cleaning achievable with this model of RASKIA cleaner eliminates in most cases the need to install a secondary cleaner on the belt.
Suitable and recommended for
particularly sticky and difficult to scrape materials
- high tensioning loads
- high flow rates
Technical specifications
- modular RASKIA scraping elements in steel with hard metal insert
- trapezoidal shock absorber with elastomer core
- anti-scale plate availability
- single blade scraping width: 100 mm
Types of tension
- manual tensioning
- single for belts up to B800, double for belts of greater width
- single for belts up to B800, double for belts of greater width
- suitable for uses where it is difficult to access the cleaner for re-tensioning
- easily connectible to the compressed air network
| PA |
|
self-powered pneumatic
|
- single for belts up to B800, double for belts of greater width
- suitable for uses where it is difficult to access the cleaner for re-tensioning
- having a tank axle for compressed air (Pmax = 8bar)
- easily connected to the compressed air network or can easily be filled using a battery powered portable compressor or through a hand pump if necessary