Simple, compact and efficient cannons
Lower noise
Aircannons with fire valves internal to the tank.
The fire valve is equipped with a FOM diaphragm elastomer obturator
The strong point of the EXTREME aircannons is their extreme simplicity achieved by reducing the internal components of the fire valve to the essential. The ordinary maintenance of these cannons is done in a few minutes and at very low costs.
Technical Specifications
DN50
Pmax = 10bar
Areas of application
|
ZF |
(-10°C, +60°C) |
cold zone, up to room temperature |
ZC |
(-10°C, +100°C) |
hot zone (ZC area limitations requires a feasibility assessment by our Technicians) |
The EXTREME aircannons are available in the following versions:
EXTREME BASE |
|
Model that can be activated using a solenoid on-off valve at the machineside or can be equipped with a CRONO indipendent fire valve wired at the machineside for remote (max 9 metres) activation of the cannon without suffering load losses |
EXTREME KY |
|
Model that incorporates the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to limit energy consumption, but also to regulate the actual discharge power from the cannon (from 0 to 8 bar with Pmax=10 bar) |
EXTREME CR |
|
Model that incorporates the CRONO start device for remote (max 9 metres) activation of the cannon without suffering load losses |
EXTREME CRKY |
|
Model that incorporates both the CRONO start device for remote control and the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to limit energy consumption, but also to regulate the actual discharge power from the cannon (from 0 to 8 bar with Pmax=10 bar) |
N.B. For remote operation further than 9 metres use the /LOGOS multi-function valve