Ideal for use in small silos
Easy to operate
Easy to maintain
The fire valve is equipped with a FOM diaphragm obturator made of elastomer.
Valves that are compact and of reduced dimensions that are suitable in particular for the handling of sands, powders, and other granular material either dry or wet, that are stored in silos and hoppers or for use in points of transit(connecting ducts, transport pipes, etc.).
Operable through solenoid command valve installed on board the machine.
The BASICFOM valves are available in the BASICFOM 90 model: with 90° discharge in relation to the intake coupling
The activation command may be
- manual
- semi-automatic with external connector
- pre-established frequencies using PLC cyclical programming
Technical Specifications
DN50
Pmax = 10bar
|
Areas of application
|
| ZF |
(-10°C, +60°C) |
cold zones, up to room temperature |
| ZC |
(-10°C, +100°C) |
hot zone (ZC area limitations requires a feasibility assessment by our Technicians)
|
The BASICFOM are available in the following versions:
| BASICFOM 90
|
|
Standard model can be activated through solenoid connection valve on board the machine
|
| BASICFOM 90 KY |
|
Model that incorporates the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to contain energy consumption, but also to adjust the effective output of the cannon's discharge (from 0 to 8 bar with Pmax=10 bar)
|