Menu

/EXTREME

Simple, compact and efficient
Extreme ease of maintenance
Low operational cost

Highly innovative!

Fire valves are integrated to the tank: the dedicated tank is an integral part of the valve.

The fire valve is equipped with a FOM diaphragm obturator made of elastomer.

The main strength of EXTREME valves is their extreme simplicity achieved by reducing the internal components of the fire valve to the essentials: routine maintenance of these valves is completed in just a few minutes.

Technical Specifications

DN50/DN100
Pmax = 10bar

Areas of application
ZF  (-10°C, +60°C)  cold zones, up to room temperature
ZC (-10°C, +100°C) hot zone (ZC area limitations requires a feasibility assessment)


The EXTREME valves are available in the following versions:

EXTREME BASE
Model activated using a solenoid connection valve on board the machine or can be equipped with a CRONO trigger independently wired onto the machine for remote (max 9 metres) operation of the cannon without suffering load losses
EXTREME KY
Model that incorporates the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to contain energy consumption, but also to adjust the effective output of the cannon's discharge (from 0 to 8 bar with Pmax=10 bar)
EXTREME CR
Model that incorporates the CRONO start device for remote (max 9 metres) operation of the cannon without suffering load losses
EXTREME CRKY
Model that incorporates both the CRONO start device for remote control and the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to contain energy consumption, but also to adjust the effective output of the cannon's discharge (from 0 to 8 bar with Pmax=10 bar)

N.B. For remote operation further than 9 metres use the /LOGOS multi-function valve

/EXTREME BASE
/EXTREME KY
/EXTREME CR
/EXTREME CRKY
Background Color:
 
Background Pattern:
Reset