Menu

/LIGHT

Extremely lightweight, simple and efficient

Fire valves integrated to the tank: the dedicated tank is an integral part of the valve.
The fire valve is equipped with an elastomer cup-shaped obturator.
Ideal for the disintegration of small blockages (pipes, chutes, ducts, small dust deposits).

Technical Specifications

DN50
Pmax = 10bar

Areas of application
ZF  (-10°C, +60°C)  cold zones, up to room temperature
ZC (-10°C, +100°C) hot zone identifies fire valves suitable for work areas not to exceed Tmax 100°C
HT (-10°C, +100°C) high temperature zone identifies valves suitable for work in areas not to exceed Tmax 100°C and subject to direct heat radiation and pronounced corrosion


The LIGHT valve is available in the following versions:

LIGHT BASE

Model activated using a solenoid connection valve on board the machine or can be equipped with a CRONO trigger independently wired onto the machine for remote (max 9 metres) operation of the cannon without suffering load losses

     
LIGHT KY
Model that incorporates the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to contain energy consumption, but also to adjust the effective output of the cannon's discharge (from 0 to 8 bar with Pmax=10 bar)
     
LIGHT CR
Model that incorporates the CRONO start device for remote (max 9 metres) operation of the cannon without suffering load losses
     
LIGHT CRKY
Model that incorporates both the CRONO start device for remote control and the KYOTO partializing device. KYOTO, when paired with a cannon of the /AIRFOM family, allows not only to contain energy consumption, but also to adjust the effective output of the cannon's discharge (from 0 to 8 bar with Pmax=10 bar)
     

N.B. For remote operation further than 9 metres use the /LOGOS multi-function valve

/LIGHT BASE
/LIGHT KY
/LIGHT CR
/LIGHT CRKY
Background Color:
 
Background Pattern:
Reset