Generation of wood dust in the belt drop areas as material passes on the conveyor belt. Typically treated materials: wood chips, cardboard/paper dust.
Once the technical inspection had been carried out, two points identified as strategic for reducing dust emissions were equipped with AIROX nebulisation points. Equipped critical points:
- Discharge into main hopper with shovel: installation of DANCERFOG rotating nebulization modules
- Belt transfer stations: depending on the height of the fall and the level of dust emission detected, 7 AIROX IMPACT M series nebulizers were installed.
The attachment of the nebulizers was made with
- our fixing caps in cases where protective fairings were already present
- our AIROX brackets for installation in open structures.
Thanks to the fine micronization (atomization) of AIROX IMPACT, the consumption of compressed air and water is minimal: the standard operating conditions require the use of water at a pressure of 0.2÷1.5 and air at 2.5÷3bar. The quantity of water necessary for micronization is infinitesimal: this means that the nebulization of AIROX does not involve a change in the humidity conditions of the material.
Typically treated materials: wood chips, cardboard/paper dust.
